0.3 mm cut width.
The spring steel blades cut your raw tobacco to 0.3 millimeters. Finer than industrial cut, and even across the entire working width of 63 mm.
Fine cut by your own hand.
Music: “Dreamer” by Kevin MacLeod (incompetech.com), licensed under CC BY 4.0
Fine cut at 0.3 mm – in the highest quality and without effort.
A tool for raw tobacco. 0.3 millimeters, finer than industrial cut. Made of steel, brass and precious wood, assembled by hand.
Over 410 blades and scrapers.
Two rollers, synchronized by hardened gears. The shaft runs in sealed ball bearings. Everything is driven by hand, via the crank.
Steel, brass, precious wood.
A frame of solid sheet steel, details in solid brass, a base of oiled precious wood. Materials you want to touch.
Limited individual build.
You order – we guarantee that your FINECUT PRO ships within 5 working days.
The cutting mechanism
Two rollers.
Two rollers.
One cut.
The blades interlock, and the scrapers keep the gaps clear. What goes in at the top as a leaf comes out at the bottom as fine cut.
0.3mmCut width
410+Blades and scrapers
Everything that's inside.
No electronics, no motor. A mechanical tool you can understand. Here are its specifications.
- Cut width0.3 mm
- Working width63 mm
- Cutting mechanismTwo rollersover 410 blades and scrapers
- BladesSpring steel
- Bearingssealed ball bearings
- Synchronizationhardened gears
- Framesolid sheet steel, black
- DetailsSolid brass
- BasePrecious wood, oiled
- DriveHand crank, 8 mm hex
- DimensionsW × L × H16 × 16 × 18 cm
- Weight1,800 g
- Warranty1 year on wear
Materials
Steel
Frame of solid sheet steel, blades of spring steel. The structure that holds everything in position.
Brass
Solid brass details on the bearings, shaft and fasteners. Over time, it develops a patina.
Precious wood
The base is made of oiled precious wood. Every board has its own grain.
For those who run the numbers
Your numbers, not ours.
Anyone who cuts their own raw tobacco knows their consumption and their prices. The cost calculator takes your own values and shows when €579 pays off for you.
To the cost calculator →
For those who love the cutting itself
Crank, rollers, 0.3 mm.
A mechanical tool that lets you feel every turn. Steel, brass and precious wood, built as a limited individual build. A machine you're happy to leave out on the table.
Technical data →
Cost calculator
See for yourself.
Your FINECUT PRO pays for itself after a short time. Enter your weekly consumption and your prices – the cost calculator shows when the €579 pays off for you.
Savings per week– €
Savings per month– €
Pays for itself after
– months
Once you've entered all three values, your result will appear here.
Limited individual build
Three steps to your machine.
You order – we guarantee that your FINECUT PRO ships within 5 working days.
Step 01
Order
You order and pay through our secure checkout, in installments with Klarna if you prefer. You'll receive your order confirmation by email.
Step 02
Individual build
Your FINECUT PRO is completed for you as a limited individual build and assembled by hand.
Step 03
Shipping within 5 working days
We guarantee shipping within 5 working days – within Germany with Hermes, and on request to Europe and worldwide.
Limited individual build
FINECUT PRO
€579.00incl. 19 % VAT, plus shipping
KlarnaInstallment payment available · Terms at checkout
Tobacco cutter for raw tobacco with a 0.3 mm cut width. Frame of sheet steel, details in solid brass, base of oiled precious wood. Assembled by hand.
What's included
- FINECUT PRO black edition
- Precious wood base
- Hand crank
- Cleaning brush
- Maintenance and care instructions
- Warranty certificate (1 year on wear)
Shipping and delivery time
We guarantee shipping within 5 working days. Shipping costs: Germany (Hermes) €9.90, EU €39, Europe outside the EU €49.99, worldwide €79. Details in the shipping information.
Warranty and withdrawal
1-year warranty on wear; the warranty certificate is included. Your statutory warranty rights remain unaffected. The statutory right of withdrawal applies; details are in the withdrawal policy.
Payment and installments
You pay securely via Stripe. Installment payment with Klarna is available; you'll see the terms at checkout. All available payment methods are shown to you at checkout. You'll receive your invoice by email.
Secure payment via Stripe · Installment payment with Klarna available · Shipping within 5 working days
Installments
Pay conveniently in installments with Klarna.
Choose Klarna at checkout and pay for your FINECUT PRO in installments. You'll see the exact terms at checkout before you complete your order.
KlarnaPayPalCard
Order now · €579
Frequently asked questions.
Ask a question →How fine does the FINECUT PRO cut?
The cut width is 0.3 mm, with a working width of 63 mm.
What is the machine made of?
Frame of solid sheet steel, cutting blades of spring steel, details in solid brass, base of oiled precious wood. The shaft runs in sealed ball bearings, and the rollers are synchronized by hardened gears.
How large and heavy is it?
W 16 × L 16 × H 18 cm, weight 1,800 g.
What's included?
FINECUT PRO, precious wood base, hand crank, cleaning brush, maintenance and care instructions, and the warranty certificate.
How quickly does it ship, and where to?
We guarantee shipping within 5 working days. We deliver to Germany (Hermes, €9.90), the EU (€39), the rest of Europe (€49.99) and worldwide (€79). More in the shipping information.
Is there a warranty?
Yes, a 1-year warranty on wear according to the enclosed warranty certificate. Your statutory warranty rights remain unaffected.
Can I pay in installments?
Yes, installment payment with Klarna is available. You'll see the terms at checkout before you complete your order.
Will the machine pay off for me?
That depends on your consumption and your prices. The cost calculator shows it using your own values.
How do I prepare the raw tobacco?
First cut the leaves into manageable strips: Virginia to approx. 60 mm, Burley to approx. 40 mm. You can combine different varieties directly by laying the leaves on top of one another; this way they blend evenly as they're cut.
How moist should the tobacco be?
Supple, but not sticky when pressed together. Tobacco that is too moist makes the blades stick and gums up the machine, while tobacco that is too dry crumbles to dust when cut.
How much can I cut at once?
Never feed more than 2 leaves through the machine at the same time. Too much resistance can permanently damage the cutting rollers or housing.
How do I care for the machine?
Lubricate only with Ballistol oil. The paper trick has proven its worth: lightly soak a piece of paper with Ballistol, wipe off excess oil with a paper towel (damp, not dripping) and crank the paper through the machine. The oil lightly lubricates the blades and loosens resin residue from the rollers. A well-oiled machine runs more smoothly and cuts better.
